UPDI Atmel programmer
based on https://github.com/wagiminator/AVR-Programmer/tree/master/UPDI_HV_Programmer
HV UPDI (High-Voltage Unified Program and Debug Interface) programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers built on ATmega8/88/168/328 based on the design and the firmware by Dlloydev (https://github.com/Dlloydev/jtag2updi). The HV UPDI programmer will enable you to use the additional configuration settings for the UPDI pin without the fear of getting locked out from the MCU. It features 3 programming modes: UPDI, HV or PCHV, with the target voltage at 5V.
Mode Jumper Settings:
| Mode Jumper | Prog Mode | PA0 Configurations | HV Pulse | Power Cycle |
|---|---|---|---|---|
| no jumper | UPDI | UPDI | NO | NO |
| pins 2-3 shorted | HV | UPDI, RESET | YES | NO |
| pins 1-2 shorted | PCHV | UPDI, RESET, GPIO | YES | YES |
UPDI Atmel programmer
- Код на продукта: HV UPDI programmer
- Наличност: 7
-
30.00лв.
- Без данък: 25.00лв.
Тагове: HV UPDI programmer